www.microscopenet.com
5
2.5 Installation of the glass filter
1) Swing out the color filter holder under the condenser.
2)
Place the filter into the color filter holder as shown in
Fig. 2
, swing the holder in.
2.6 Replacing the fuse
1) Turn off the power switch and disconnect the power cord.
2) Find the fuse holder at the rear bottom of the microscope body.
3) Pry out the fuse holder gently with a flat head screwdriver.
4) Replace the old fuse with a new one, and then insert it back in. See
Fig. 3
.
2.7 Installation of the camera (optional, may not included
in your package)
1) Take off the plastic cover on the photo tube.
2) Insert the camera into the photo tube, and then connect
the camera to a computer via USB2.0 cable. See
Fig.4
.
3) The manual for the camera is on a CD (or mini CD). Refer
to the manual to install the driver and software on to the
computer.
4) The camera is optional and may have different color and
shape from the one in the figure, depending on the
model purchased.
2.8 Installation of darkfield condensers
(optional, may not
included in your package)
Please see section 7
(
Darkfield Condenser Installation and Operation Instructions
)
2.9 Installation of phase contrast kits
(optional, may not included in your package)
Please see section 8
(
Phase Contrast Kit Installation and Operation Instructions
)
Camera
Photo Tube
Fig.3
Fig.4
Color Filter
Color Filter Holder
Fig.2
Fuse Holder
Fuses
Fig.3
