www.microscope.com
Power and Illumination for the OM136L
The input voltage is.110v~240v AC 50/60hz. into the AC/DC
adapter power block.
The output voltage is 4.5v @1000ma out of the AC/DC adapter
power block.
Do not overcharge the internal batteries. Remove AC power
when batteries are charged (approximately 2 hours).
If the internal batteries need replacement, slide the battery
cover forward (in direction of arrow) and lift off. Three NiMH
“AA”s are used. Replace when microscope fails to hold a
charge.
The LEDs do not require maintenance.
NOTES:
Summary of Contents for OM136C
Page 7: ...www microscope com NOTES...