29
B
– INSTALLATION
- Installation should be done by a qualified technician according to the instructions. Our
company cannot be held responsible for any damage to people, animals or property due to
incorrect installation.
- In case the device malfunctions, turn off the device. Only a service center authorized by
the manufacturer should service the device. Ask for original spare parts.
- The ground on which the device will be placed must be flat and it must be ensured that
the device operates on a scale. Take necessary precautions against the risk of the
product tipping over.
- Connection to the electrical power supply must be made by a competent person.
- Please be sure that the voltage connected to appliance must be equal with the voltage
which is on appliance’s label.
- The ground connection of the device must be made in accordance with standards and
safety rules.
- The grounding of the device should be connected to the grounding line which is the closest
panel of electrical installation.
- Device electrical connection, main fuse and leakage current fuse must be made in
accordance with the current regulations and rules.
- The rotation direction of the cutter blade inside your machine is clockwise. If the blades
rotate in the opposite direction after the first assembly of the machine, notify the
authorized service immediately.
- - Holding the hopper by its handles, place it on the middle drive shaft bearing. Secure the
bowl by turning it clockwise.
Summary of Contents for Omk.SZP01.E11.0101.Z5F
