28
D
– OPERATION INFORMATION
Figure 1
A:
Lighter
B:
Closed position
C:
Full flame position
D:
Half flame position
- Usage:
Before starting to use, make sure that grill gas connections are correct and complete. When
using the device for the first time, turn the temperature adjustment knob to full flame and run
it idle for 30 minutes. Some odor and smoke may occur due to the insulating coating
material during operation. It will then disappear.
Set the device to the desired temperature setting. However, it is not sufficient for
homogeneous heating of the grill cooking area. For this, preheat the device for a
homogeneous heat distribution between 30
– 45 minutes by adjusting the heat setting to the
desired level each time it is used for the first time. Then proceed to the cooking process.
In case the flame goes out for any reason, the device will turn itself off automatically. In this
case, light the burner again with the lighter.
Summary of Contents for Omk.MLP01.N11.0040.000
