18
By pressing the SERVICE button we are in
the
SERVICE
settings mode.
Scroll to selected line and press
SHOW
or
SET
(depending on the line).
We selected last 20
FAULTS
to show.
Press
EXIT
Go to
SET EBS1 AUTO
and press
SET.
PA will automatically set 20mA on the front
and back tube separately. When finished
successfully, you will see SET EBS1 AUTO OK
on the screen
You can try to do this manually, too.
Scroll to
SET EBS1 MANUAL
and press
SET.
Use up/down buttons to set 20mA or as
close as possible value and press
SAVE
.
Similar ways
EBS2
can be preprogrammed
(300mA by AUTO set).
Or another value of EBS2 by MANUAL Set.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
