Olympus ZUIKO DIGITAL ED 300mm F2.8, Instructions Manual

Page: 8 / 36

15 14
Attaching the Lens Strap
Nomenclature
① Focus stop buttons (x4)
② Drop-in filter
③ Mounting index
④ Rear cap
⑤ Strap attachment
⑥ Focus limit switch
⑦ Focus ring
⑧ Filter mount thread
⑨ Hood attaching section
⑩ Electrical contacts
⑪ Tripod mount
Attaching Lens Hood LH-120
<During use>
<During storage>
Filters
The lens comes with the following filters.
① Standard clear filter SCF-43 .... Always mount this filter when not using any
of the other filters.
② ND4-43 .................................... Decreases the amount of light entering the
lens by 1/4.
③ ND8-43 .................................... Decreases the amount of light entering the
lens by 1/8.
④ Drop-in PL filter DPF-43
This filter eliminates surface reflected light.
The amount of reflected light eliminated can be adjusted with a rotary lever.
Attaching the Lens Case Strap
Before mounting the hood on the lens, be sure to fit
the claw inside the lens hood into the groove at the
edge of the lens barrel.
To mount the hood on the lens for storage, put the
hood on the lens as shown and fit the claw inside
the lens hood securely into the groove at the edge
of the lens barrel.