Page 38 of 76
Issue 20 : July 2012
WM--P1 SERIES WORKSTATIONS
Item
Description
Part No
Qty
Torque
Remarks
90
SPARE
91
NUT M8 DOMED NATURAL NYLON . . . . . . . . . . . . . . . . . . K10006640
1
--
DP1
92
SPACER 18MM OD x 8.2MM ID x 5MM LG . . . . . . . . . . . . . K10006641
1
--
DP1
93
LIMITER -- FRONT ( MAJ--181 ) . . . . . . . . . . . . . . . . . . . . . . K10007121
1
--
DP1, Y
94
LIMITER REAR (MAJ--181) . . . . . . . . . . . . . . . . . . . . . . . . . K10007122
2
--
Y
95
SCREW M8 x 50 SKT CAP HD . . . . . . . . . . . . . . . . . . . . . . 3050998
2
--
Y
96
PAINT -- WHITE KEYMED SPEC 74 . . . . . . . . . . . . . . . . . . K10006564
400ML
--
--
97
PAINT -- LILAC KEYMED SPEC 76 . . . . . . . . . . . . . . . . . . . K10006565
400ML
--
--
REMARKS
A
Tighten to 4Nm when used to secure item 15, Support Top Tray. Ref figure 6--1
B
Tighten to 6Nm when used to secure item 25, Water Bottle Bracket. Ref figure 6--3
C
Supplied in ACCESSORY KIT WM--NP1 100V JP
K10004488
D
Supplied in ACCESSORY KIT WM--NP1 100V--120V US
K10004489
E
Supplied in ACCESSORY KIT 1332 WM--WP1 100V JP
K10004498
F
Supplied in ACCESSORY KIT 1333 WM--WP1 110--120V US
K10004499
G
Supplied in ACCESSORY KIT FOR WM--WP1 UK,EU,ROW
K10004466
H
Supplied in REAR PANEL KIT WM--NP1
K10005044
J
Supplied in REAR PANEL KIT WM--WP1
K10005045
L
Supplied in FREE CASTOR KIT -- WM--P1 SERIES ( NON A/S )
K10004627
M
Supplied in BRAKED CASTOR KIT ( NON A/S )
K10004626
N
Used on WM--NP1 A/S & WM--WP1 A/S ( and all UK after Oct 07)
P
Used on WM--NP1 220--240V EU--A/S & WM--WP1 220--240V EU--A/S (and all UK after Oct 07)
R
Supplied in MAJ--198 WM--NP1 SHELF KIT (NARROW)
K10001429
S
Supplied in MAJ--199 WM--WP1 SHELF KIT (WIDE)
K10001430
T
Supplied in CASTOR BRAKED KIT WM--P1 SERIES A/S
K10005040
U
Supplied in CASTOR FREE KIT WM--P1 SERIES A/S
K10005041
V
Supplied in REMOTE SWITCH KIT WM--P1 SERIES
K10005049
W
Supplied in UMIBILICAL/CAMERA HEAD HOLDER KIT
K10006648
Y
Supplied in LIMITER -- MOVEMENT ( MAJ--181 )
K10007108 Contents :--
93/1 LIMITER FRONT ( MAJ--181 ) . . . . . . . . . . . . . . . . . . . . K10007121
93/2 LIMITER REAR ( MAJ--181 ) . . . . . . . . . . . . . . . . . . . . . . K10007122
93/3 SCREW M8 x 50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3050998
93/4 WASHER CRINKLE M8 . . . . . . . . . . . . . . . . . . . . . . . . . K3920997
93/5 WASHER M8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3920372
93/6 INSTRUCTIONS LIMITERS FOR MAJ--181 . . . . . . . . . . . K10008095
Z
Early models of WM--NP1 were fitted with a ’Support Top Tray’ ( item 15). On later models a redesigned top tray reduced
the support required to; 2, PLATES SUPPORT WM--DP1, item 10, p/no K10006102.
The early model top tray is no longer available and a current top tray and plates support must be used. The ’Support Top
Tray’ ( item 15) cannot be used and should be discarded.
AA
Oct 2007 -- all UK workstations now supplied fitted with antistatic castors.
BB
Refer to Chapter 6.6 for torque tightening figures.
NS
Not Shown
