Olympus USPM-45EXP Operation Manual Download Page 5

 

PV9353F4E007 3 

Safety Precautions 

Intended use of this product 

This product is intended for use with the prismatic 45-degree reflection measurement in 
combination with "NIR Micro-Spectrophotometer (USPM-W-B)." Do not use this product for 
any other purpose.   
For use of the "NIR Micro-Spectrophotometer (USPM-W-B)," please read its operation 
manual. 
 

About this operation manual 

This operation manual includes indispensable information regarding how to use this 
product safely and effectively. Before use, be sure to read and thoroughly understand this 
operation manual and the manual of the device to be used in combination, and then use 
the products following the instructions. 
If you use this product in any way other than instructed by this operation manual, safety 
cannot be guaranteed. 
Keep this operation manual and the manual of the device to be used in combination at 
hand. If you have any question regarding the content of this operation manual, please 
contact your dealer or our sales department. 
 

Prohibition of repairs or modifications to the product 

Do not disassemble or modify this product in cases other than those regarding the 
replacement of consumables. Doing so can cause damage to the user, the product, or the 
security of functions. If you assume that a repair is necessary, treat the problem by 
following "6. If Abnormality Occurs." If you cannot treat the problem using the means above, 
stop using the product and contact your dealer or our sales department. 
 

Warning indications in this manual 

In this manual, the symbol marks and terms below are used in accordance with the 
description contents. The symbol marks and terms are described for each safety level. To 
use the product safely and properly, thoroughly understand the contents of symbol marks 
and terms. 
 
 
 
 
 
 
 
 
 

Indicates that serious personal injury or death may result if this 
warning is not followed. 

Indicates that moderate human injury or material damage to this 
device may result if this caution is not followed. 

Summary of Contents for USPM-45EXP






























Reviews: