28
Chapter 3 Installation and Connection
HIGH FLOW INSUFFLATION UNIT UHI-3
1.
Use the supplied wrench to attach the medical gas pipeline adaptor for
UHI-3 to the CO
2
gas inlet on the rear panel of the UHI-3. Tighten with a
force of 24.5 N
⋅
m (2.5 kgf
⋅
m) (see Figure 3.2).
2.
Connect the adaptor to the hose for medical gas pipeline (see Figure 3.4).
3.
Connect the hose to the CO
2
gas connector of the medical gas pipeline.
Figure 3.4
3.5
Connecting the foot switch (MH-317)
The connector section of the foot switch is not watertight.
Keep it away from fluids.
Insert the foot switch’s connector into the foot switch connector on the rear panel
of the UHI-3 until it clicks (see Figure 3.5).
Figure 3.5
Hose for medical gas pipeline
Medical gas pipeline adaptor for UHI-3