Example 4
(shutter trigger every 8 minutes)
Press and hold the
centre and right buttons
.
Press and release the
left button
then release the
centre and right buttons
during the third led rapid flash.
This will load preset 3 delay times into the memories.
Press and hold the
centre button
then press and release the
left button
.
The led will flash two times indicating that memory 2 has been selected.
Press and hold the
centre button
then press and release the
left button
.
The led will flash three times indicating that memory 3 has been selected.
Press and hold the
centre button
then press and release the
left button
.
The led will flash four times indicating that memory 4 has been selected.
Press and hold the
centre button
then press and release the
left button
.
The led will flash five times indicating that memory 5 has been selected.
The unit will now send a shutter trigger every 8 minutes.
Example 5
(user defined delay. Shutter trigger every 15 seconds)
Press and hold the
right button
then press and release the
left button
.
The led will light indicating that the unit is ready to record a user delay.
Releasing the
right button
starts the user delay and the led will flash every second.
Count off 15 flashers then press and release the
right button
this will set a 15 second delay
Into the currently selected memory.
The unit will now send a shutter trigger every 15 seconds
Example 6
(user defined delay. Shutter trigger every 150 seconds)
Press and hold the
right button
then press and release the
left button
.
The led will light indicating that the unit is ready to record a user delay.
Releasing the
right button
starts the user delay and the led will flash every second.
Count off 15 flashers then press and release the
centre button
this will set a 150 second delay Into
the currently selected memory.
The unit will now send a shutter trigger every 150 seconds
