Selecting a preset
Press and hold the
centre and right buttons
then press and release the
left button
.
The led will now flash 3 times with a rapid pulse.
Releasing the
centre and right buttons
during the first flash will select preset 1.
Releasing the
centre and right buttons
during the second flash will select preset 2.
Releasing the
centre and right buttons
during the third flash will select preset 3.
Selecting a memory
There are five memories in the unit.
After a preset has been selected memory 1 is selected by default.
Pressing and holding the
centre button
then pressing and releasing the
left button
will increment
the selected memory the led will flash indicating the memory selected.
After selecting memory 5 the unit will loop back to memory 1.
User delay setup
Press and hold the
right button
then press and release the
left button
.
The green led will now be on indicating that the unit is ready to record a user delay.
The delay starts when you release the
right button
and stops when you press the
right button
.
After you release the
right button
the green led will flash every second, you can either count the
flashes or use a clock with seconds to set the delay.
After pressing the
right button
to set the delay the first shutter trigger will be sent.
You can set a delay of between 1 second and 960 seconds (16 minutes)
To set a longer delay you can press the
centre button
instead of the
right button
this will set the
delay to 10 times your user delay.
If you wait 10 seconds then press the
right button
you will get 10 seconds if you wait 10 seconds
then press the
centre button
you will get 100 seconds.
So you can set delay of between 10 seconds and 9600 seconds (160 minutes).
You can set a different user delay in each of the five memories.
User delays will be lost if you reload a delay preset.
