Olympus TG-860, Instruction Manual

Page: 40 / 124

40 EN
Aspect Sets the horizontal-to-vertical ratio of images.

4:3
Change the horizontal-to-vertical ratio when taking
pictures.
P
16:9
Q
3:2

1:1
Image size
(movies)
Sets the number of recording pixels.
c 1080 60p
*1
Shoots smooth full HD movies at 60 frames per second
(fps).

1080p Shoots full HD movies.

720p Shoots HD movies.
@
VGA Shoots 640×480 movies.
y
HS 120
*1, 2
Shoots 640×480 HS movies.
z
HS 240
*1, 2
Shoots 480×360 HS movies.
*1
You can set only when [Vivid], [Natural], and [Muted] is set on the picture
mode in P and
a
mode.
*2 HS movie : Film quickly moving subjects for slow-motion playback.
• In certain shooting modes, some functions cannot be set.
g
“List of settings
available in each shooting mode” (P. 105).
• Examples of image size when the aspect ratio is [

].
Registering one touch white balance
Select [  One Touch 1] or [  One Touch 2], face the camera toward a
piece of white paper or other white object, and press the

button.
• The camera releases the shutter and the white balance is registered.
When the white balance was previously registered, the registered data is
updated.
• The registered white balance data will not be cleared by turning off the
power.
• Perform this procedure under the light where the pictures will be actually
taken.
• When the camera settings are changed, the white balance must be
registered again.
• When the white balance cannot be registered, check that the white paper
fills the screen, and then perform the procedure again.