Olympus TG-830, Instruction Manual

Page: 29 / 101

29
EN
ISO sensitivity Sets the ISO sensitivity.
l ISO Auto The camera automatically sets the sensitivity with priority on image quality.
m High ISO
Auto The camera automatically sets the sensitivity with priority on minimizing blur caused
by a moving subject or by camera shake.
S
to
P Value Set a smaller value to reduce noise in the picture, or a larger value to reduce blur.
Drive Sets the sequential shooting function.
o Single One frame is shot each time the shutter button is pressed.

Sequential 1 The camera takes sequential shots at approximately 2.5 frames/sec.

Sequential 2 The camera takes up to 17 sequential shots at approximately 10 frames/sec.
c High-Speed1 The camera takes up to 60 sequential shots at approximately 15 frames/sec.
d High-Speed2 The camera takes up to 60 sequential shots at approximately 60 frames/sec.

Auto Split
Shooting The camera takes up to 16 photos at regular intervals while holding the shutter
button.
Image size Sets the number of recording pixels.

4608×3456 Suitable for printing pictures over A3 (11×17 in.).
4 3200×2400 Suitable for printing pictures up to A3 (11×17 in.).
3 1920×1440 Suitable for printing pictures up to A4 size (8.5×11 in.).
7 640×480 Suitable for using pictures on emails.
Aspect Sets the horizontal-to-vertical ratio of images.
u
4:3
Change the horizontal-to-vertical ratio when taking pictures.
v
16:9
w
3:2
x
1:1
●
In certain shooting modes, some functions cannot be set. Refer to “List of settings available in each shooting
mode” (p. 71).
●
Examples of image size when the aspect ratio is 4:3.