24
9-6 Cup stage SZH-SC
Before mounting, remove dirt and dust from the mount surfaces and handle carefully so as not to
damage them.
STAD mount for ILLT SZX2-STADM is necessary for using the SZX2-ILLTQ/ILLTS LED transmitted light
illumination base. For details, refer to the instruction manual for the SZX2-ILLTQ/ILLTS LED.
Specimen holder
Stage plate
Specimen holder mount hole
Cup stage
2
1
4
3
Applicable stand
Seat
Sliding surface
Stage plate mount hole
Fit the cup stage seat into the stage plate mount hole of an applicable stand.
Place the cup stage on the seat. Before placing, wipe the sliding surface on the cup stage and seat with a clean cloth.
Mount the stage plate.
Mount the specimen holder.
Clean the sliding surface periodically.
NOTE
TIP
1
2
3
4
TIP
1
External view and nomenclature
2
Installation
The SZH-SC can be used only with reflected light illumination. It cannot be used with transmitted light
illumination.
NOTE
Finger hook
Seat
Same size as the stage plate.
Cup stage
Tilting limit angle: 30°
Tube
Specimen holder
Specimen holder mount holes
Stage plate*
Downloaded from
