background image

SZX

14

5-4  TV Observation and Photomicrography

}When TV observation or photomicrography is required, use the SZX-TR30 trinocular tube.

A TV camera and/or digital camera unit can be mounted on the SZX-TR30 trinocular tube by means of the TV adapter

and/or camera mount adapter

*

.

 *

The camera mount adapter is not necessary if a TV adapter equipped with a camera mount is used.

For details, please also read the instruction manuals for the TV adapter and digital camera.

2

    Mounting the TV Adapter

(Fig. 26)

1. Using the Allen screwdriver, fully loosen the straight tube clamping screw

@ of the straight tube mount on the top of the trinocular tube.

2. Fit the round dovetail ² of the TV adapter into the straight tube mount of

the trinocular tube, and tighten the clamping screw @.

3. Mount the TV camera on the TV adapter. A camera mount adapter may

be required with certain TV adapters.

3

    Selecting the TV Camera Light Path

(Fig. 26)

Pull out the light path selector knob ³ to select the Binocular 20%/TV &

Photo 80% light path setting.

Fig. 26

@

³

1

    Selecting the TV Adapter Magnification

Set the magnification of the TV adapter according to the size of the CCD in the TV camera or digital camera.

The following figures show the TV observation areas when the WHS10X eyepieces with FN 22 are used.

1 in. CCD

2/3 in. CCD

1/2 in. CCD

When the 0.5X TV adapter is used

When the 1X TV adapter is used

²

Summary of Contents for SZH-STAD1



































Reviews: