Olympus Stylus ZOOM 105 DLX Instructions Manual Download Page 58

Page: 58 / 65

The autofocus didn't work correctly. There are some

subjects that are difficult for the autofocus to lock on.

These include: glossy or reflective surfaces, black

objects, subjects behind glass or wire mesh, flames

and smoke, excessively bright light within the picture

area.

First focus on an object at the same distance as the

desired subject.Then aim at the desired subject
and release the shutter release button. (P.36)

The picture is too dark.

The flash was blocked, (e.g. by a finger).

Hold the camera correctly, keeping your fingers

clear of the flash. (P. 15)
The subject was out of the working range of the flash.

Shoot within the flash working range. (P. 31)

The flash mode was set to OFF.

Check the flash mode before shooting. (P. 29)

Summary of Contents for Stylus ZOOM 105 DLX


































































Search results

Summary of Contents for Stylus ZOOM 105 DLX

Reviews:

Related manuals for Stylus ZOOM 105 DLX

Brands by name

Popular brands

Olympus Stylus ZOOM 105 DLX, Instructions Manual

Search results

Summary of Contents for Stylus ZOOM 105 DLX

Reviews:

Related manuals for Stylus ZOOM 105 DLX

Brands by name

Popular brands