Menu op
erati
ons
EN
39
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV’s video
signal type.
• TV video signal types by country/region. Check the video signal type before connecting the
camera to the TV.
NTSC : North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
When no operation has been performed for approximately 10 seconds while in shooting
mode, the monitor automatically shuts off. Pressing the zoom button or other buttons
restores the camera from power save mode.
VIDEO OUT.................................................................
POWER SAVE .....................................
Setting the camera to the power save mode
ying back pictures on a TV
Connect to the TV’s video input
(yellow) and audio input (white)
terminals.
AV cable (provided)
Multi-connector
Connector cover
Settings on the TV
Turn the TV on, and set it to video input
mode.
• For details of switching to video input,
refer to your TV’s instruction manual.
• Images and the information displayed on
the screen may become cropped
depending on the TV’s settings.
Settings on the camera
Press
o
in playback mode to turn the
camera on.
• The last picture taken is displayed on the
TV. Use the arrow pad to select the
picture you want to display.
etting the camera to the power save mode
d4344_4356_e_0000.book Page 39 Monday, December 17, 2007 9:13 AM
Summary of Contents for Stylus 1010
