4
Item
Specification
Illuminator
control
LED type
Reflected light illuminator:
MM6-ILW
Transmitted light illumination: MM6-ILG
Illuminator for focus navigator unit: MM6-ILG
Driving current
330 mA ±20 mA(max)
Power consumption
Approx. 2 W per illumination
Average life
Approx. 30000 hours (Ambient temperature 20 °C, light intensity level 50%)
Pilot lamp
ON: The main switch of the control box is turned ON.
OFF: The main switch of the control box is turned OFF.
Indicator
REMOTE
ON: The measuring microscope can be controlled by the basic software STM7-BSW.
OFF: The measuring microscope cannot be controlled by the basic software STM7-BSW.
ERROR
ON (Blink): The error is found.
OFF:
The error is not found.
HS (manual frame
only)
ON: The control box is connected to the hand switch STM7-HS.
OFF: The control box is not connected to the hand switch STM7-HS.
MCZ (motorized
frame only)
ON: The control box is connected to the focus controller STM7-MCZ.
OFF: The control box is not connected to the focus controller STM7-MCZ.
Z SCALE (motorized
frame only)
ON: The Z axis scale is connected properly.
OFF: The Z axis scale is not connected properly.
AF (motorized frame
only)
ON: ON: The control box is connected to the autofocus unit STM7-AF.
OFF: The control box is not connected to the autofocus unit STM7-AF.
HALF
ON: The counter data of X-, Y- and Z-axis is displayed in 1/2 value of the actual movement
distance.
OFF: The counter data of X, Y and Z axes is displayed normally.
EPI SEL
ON: The reflected light illumination can be controlled.
OFF: The reflected light illuminator cannot be controlled.
DIA SEL
ON: The transmitted light illumination can be controlled.
OFF: The transmitted light illumination cannot be controlled.
FN SEL
ON: The illumination for focus navigator unit can be controlled.
OFF: The illumination for focus navigator unit cannot be controlled.
F FINE (motorized
frame only)
F FINE ON:
The movement distance of the fine/coarse focusing knob of the focus
controller STM7-MCZ is small.
F COARSE ON: The movement distance of the fine/coarse focusing knob of the focus
controller STM7-MCZ is large.
F COARSE
(motorized frame
only)
AF TRACK
(motorized frame
only)
ON: The autofocusing is in Track mode.
OFF: The autofocusing is in One-Shot mode.
Z LIMIT (motorized
frame only)
ON: The lower software limit of the focus area is set.
OFF: The lower software limit of the focus area is not set.
DIP switch/ Rotary switch
For settings of DIP switch (SW1), DIP switch (SW2) and Rotary switch (SW3), refer to
“Instruction manual of Measuring Microscope STM7”.
1
Specifications
Summary of Contents for STM7-CB
Page 4: ......