10-004209-01EN [Q7750159], Rev. 2, May 2018
Operation
69
The
Mode Select
screen (see Figure 3-15 on page 68) offers four modes of operation
for the system:
•
Jog Mode (see “Jog Mode” on page 69)
•
Latched Jog Mode (see ““Latched Jog Mode” on page 73)
•
Two Axis Scan
1
(see “Two Axis Scan Mode” on page 73)
•
System Utilities (see “System Utilities Screen” on page 80)
3.4.1
Jog Mode
Jog mode manually controls the system movement using the joystick.
Jog mode is the default selection when the system is first activated.
When a raster arm is connected (see “Raster Arm Module” on page 121), both the
SteerROVER and raster arm information is displayed (see Figure 3-16 on page 69).
When a raster arm is not connected, only the SteerROVER scanner’s information is
displayed (see Figure 3-17 on page 70) under
Crawler
.
Figure 3
‑
16 Jog mode with raster arm
1. Only appears when a raster arm is detected/present.
NOTE
Summary of Contents for SteerROVER
