10-004209-01EN [Q7750159], Rev. 2, May 2018
Operation
73
3.4.2
Latched Jog Mode
Identical to standard jog mode, Latched Jog mode adds forward or reverse
SteerROVER scanner (or “crawler”) movement at the selected scan rate. This
eliminates the need to manually hold the left joystick (see “Jog Mode” on page 69).
Figure 3
‑
20 Latched Jog mode button identification–Bias button
FWD
and
REV
buttons
The
FWD
and
REV
buttons are located on the
Crawler
tab. Press the
FWD
or
REV
button to drive the SteerROVER at the current maximum scan rate. When
the SteerROVER is in motion, the raster joystick is still enabled. Touching the
handheld controller’s touchscreen or pressing the click wheel stops the
SteerROVER scanner’s movement.
The
FWD
and
REV
buttons are not displayed in rapid mode.
3.4.3
Two Axis Scan Mode
The Two Axis Scan mode allows scanning to be performed using the SteerROVER as
one axis of movement and a raster arm module as the second axis of movement.
Forward and
reverse
buttons
NOTE
Summary of Contents for SteerROVER
