![background image](http://html2.mh-extra.com/html/olympus/sp-310/sp-310_advanced-manual_4298301114.webp)
Adjusting the image processing function (PIXEL MAPPING)
114
7
S
e
ttin
g
s
There are two settings from which you can choose: [RESET] or [AUTO]. Choose the
one that is best for you when transferring images to a computer.
RESET
The file number and folder number are reset every time a new card is
inserted in the camera. The folder number returns to No. 100 and the file
number returns to No. 0001. This method is useful when grouping files
on separate cards.
AUTO
Even if a new card is inserted, the folder number and file number are
retained from the previous card, so the same file number is not used on
different cards. This helps you to manage multiple cards. This method is
useful when you want to manage all your files with sequential numbers.
Top menu
[MODE MENU]
[SETUP]
[FILE NAME]
[RESET] / [AUTO]
g
“Using the menus” (P. 17)
The pixel mapping feature allows the camera to check and adjust the CCD
and image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait at least one
minute after taking or viewing pictures to allow the pixel mapping function
to perform properly.
Top menu
[MODE MENU]
[SETUP]
[PIXEL MAPPING]
g
“Using the menus” (P. 17)
Note
• When the File No. reaches 9999, the file number returns to 0001 and the folder
number changes.
• When both the folder number and file number reach their respective maximum
number (999/9999), the number of storable pictures becomes 0 even if the card
is not full. Replace the card with a new one.
Adjusting the image processing function
(PIXEL MAPPING)