Additional commands
30
Print Setup...
Use this command from the
File
menu to determine a certain printer and printer
settings as a default for your image acquisition software.
The selected printer and the corresponding settings remain for future applica-
tions using your image acquisition software.
Printer
From the
Printer
group, select the
Name
of the desired printer from the list as
well as the corresponding properties using the
Properties...
button.
Name
The
Name
list contains all of the printers installed under Windows. The printer
which has been defined as standard by Windows in the printer settings, is the
default printer. Select the printer which you mostly use with your image acquisi-
tion software from the printer list.
Status/Type/Where/
Comment
The
Status
,
Type
,
Where
and
Comment
fields provide information about the
selected printer: operating state, printer type, path name, and additional
comments.
Properties...
Click the
Properties...
button to open the dialog box with the same name. This
will allow you to select the printer settings with regards to the configuration,
paper, graphics, and font. The exact appearance of the dialog box depends on
the selected printer and printer driver.
Paper
Select the paper size and source from the
Paper
group.
Size/Source
Select the desired entries from the
Size
and
Source
lists. The entries depend on
the printer you are using.
Format
The
Format
group enables you to determine the page alignment.
Portrait/Landscape
Select the
Portrait
format to print the pages vertically. Select the
Landscape
format to print the pages horizontally.