Olympus PT-058, Instruction Manual

Page: 33 / 204

EN 33
EN
Chemicals which cannot
be used
Explanation
Volatile organic solvents,
chemical detergents Do not clean the Case with alcohol, gasoline,
thinner or other volatile organic solvents or with
chemical detergents etc. Use pure water or
lukewarm water.
Anticorrosion agent Do not use anticorrosion agents. The metal parts
use stainless steel or brass. Wash with pure
water.
Commercial defogging
agents Do not use commercial defogging agents. Always
use the speci
fi ed desiccant silica gel.
Grease other than
speci
fi ed silicone grease
Use only the speci fi ed silicone grease for the
silicone O-ring, as otherwise the O-ring surface
may deteriorate and water leakage may occur.
Adhesive Do not use adhesive for repairs or other purposes.
When repair is required, please contact a dealer or
a service station of OLYMPUS CORPORATION.
6 Jumping into the water with the Case in your pocket or in your hand,
throwing the Case from a boat or ship into the water, and other rough
handling may cause water leakage. Please handle with suf
fi cient
care, when handing it over from hand to hand etc.
7
If the Case interior or the camera should become wet because of
water leakage, etc., immediately wipe off all moisture and contact
your local service station or dealer.
8
Please remove the O-ring when traveling by air. Otherwise air
pressure may make it impossible to open the Case.
9 For safe use of the digital camera in this product, please read the
“Instruction Manual” for the digital camera carefully.
0
When sealing this product, take suf fi cient care that no foreign matter
gets caught at the O-ring and the contact surface. It is caused for
water leakage.
a
When you install your digital camera in the Case after taking pictures
in the water, it may cause the loss of transparency of the lens inside
even if you insert the supplied silica gel to the Case when drying the
camera is insuf
fi cient.