Olympus PPO-E04, Instruction Manual

Page: 20 / 80

E-8
Screw the camera table provided with the PT-E
series case firmly into the bottom of the cam-
era.
7 Loading the Camera and Lens
The following description is applicable when the ZUIKO DIGITAL ED 7-14mm lens is used.
After installing the lens on the camera and attaching the zoom gear provided with the PER-E02 extension ring,
insert the camera into the PT-E series case on which the PER-E02 extension ring and PPO-E04 are mounted.
Remove the eyecup from the camera’s viewfind-
er. If a lens cap or filter is attached to the lens or
the strap is attached to the camera, remove them
as well.
Lift the PT- E series case’s power switch dial,
mode dial knob and zoom dial, and turn the
case’s camera table lock lever counterclock-
wise to release the lock. Refer to the PT-E
series case’s instruction manual for instructions
of how to attach the hot shoe cable for the
flash.
Zoom dial
Mode dial knob
Power switch dial
Camera table lock lever
Confirm that the camera’s power switch is OFF.
Align the “10 mm” zoom position with the zoom
index of the lens and, while pulling out the
zoom dial of the PT-E series case further, place
the camera table (with camera attached) on the
camera table mount on the inner side of the
front lid of the PT-E series case.
MENU
Pull out the zoom
dial further.