Olympus OTV-SI, Instructions Manual, Page: 80 / 174

74
Chapter 5 Operation
VIDEO SYSTEM OTV-SI
8.
To make the color more purple, press the remote control switch for
execution or “

” key on the keyboard. To make the color more green, press
the remote control switch for selection, “Enter” or “

” key on the keyboard.
• If the color is made more green, the menu shown in Figure
5.28 is displayed and “+” flashes. If the color is made more
purple, “

” flashes on the same menu. If the hue level is at
the midpoint, the display shows “0”.
• The hue level can be adjusted in

8 steps from the midpoint.
• When the hue level is at the maximum or minimum, the
display shows “+” or “

”.
9.
If no operation is performed for 3 seconds, the display returns automatically
to the previous menu shown in Figure 5.27.
• For optimum performance, set the hue level at or near its
midpoint.
• The set hue level is retained when the video system is turned
OFF and turned ON again.

Chroma level adjustment
The chroma level can be adjusted by navigating through the menu using the
remote control switches or the keyboard (optional).
1.
If the video monitor does not display the menu, press the remote control
switch for execution or for selection, the “F1”, “Enter”, “

”, “

”, “

” or “

”
key on the keyboard to display the menu.
2.
Press the remote control switch for selection, “

” or “

” key on the
keyboard and select “NEXT” (see Figure 5.6 on page 57).
3.
Press the remote control switch for execution, “Enter” or “

” key on the
keyboard four times to display the menu shown in Figure 5.7 on page 58.
4.
Press the remote control switch for selection, “

” or “

” key on the
keyboard and select “CONFG.” (see Figure 5.25 on page 71).
VISY218