Olympus OTV-SI, Instructions Manual, Page: 137 / 174

Chapter 5 Operation
131
VIDEO SYSTEM OTV-SI
4.
Press the remote control switch for selection, the “

” or “

” key on the
keyboard and select “PMP[
OFF
]” (see Figure 5.84).
Figure 5.84
5.
Press the remote control switch for execution, the “Enter”, “

” or “

” key
on the keyboard to turn air feed ON and OFF.
6.
Feed air and water following the instructions given in the videoscope’s
instruction manual.

Using the remote control switch that is assigned to
“PMP[ ]”
1.
Assign the “PMP[ ]” function to one of the remote control switches on the
videoscope following the instructions given in Section 5.9, “Remote control
switches”.
2.
Press the remote control switch for “PMP[ ]” to turn air feed ON and OFF.
3.
Feed air and water following the instructions given in the videoscope’s
instruction manual.
VISY218