VIEWFINDER DISPLAY FOR AUTOMATIC EXPOSURE
If you press the shutter release button lightly while
looking through the viewfinder, you will see the
automatic shutter speed in the left side of the
frame. However, if the "1000" blinks, it means
overexposure and you will have to close down the
aperture.
If the "1000" does not disappear even when the
lens is set to its minimum aperture, the subject is
outside the range of automatic exposure control.
In this case use an ND (neutral density) filter or
shoot with film having a lower ISO number.
Blinks to warn lens aperture must
be stopped down to avoid over-
exposure.
Shutter speed indications. Appro-
priate figure lights up.
Shutter speed of 1 sec. or slower.
48
Summary of Contents for OM-PC
