Olympus oep-4, Instructions Manual

Page: 37 / 80

S
yst
e
m
S
e
tu
p
5
5.1 Items That can be Set on Menus
37
5.1
Items That can be Set on Menus
The system setups of this instrument can be modified as
desired by the user or according to the operations
applied from the factory default. This instrument may
malfunction if the system setups are made incorrectly.
Moreover, about the item unable to set up, a setting
value is displayed by “—” and it cannot be selected.
If press “
b
” and “
B
” simultaneously during a setup, the
setting value will become the factory default value.
Table 5.1 shows the available system setup items.
Chapter 5 System Setup
Table 5.1
Menu Item Setting values Details Factory default
BASIC
SETUP INPUT SEL Same as the INPUT SEL in the INPUT SETUP menu.
LOAD COLOR Same as the LOAD COLOR in the COLOR ADJUST menu.
DARK Same as the DARK in the COLOR ADJUST menu.
LIGHT Same as the LIGHT in the COLOR ADJUST menu.
LOAD USER Same as the LOAD USER button on the front panel, or the LOAD USER in the PRINTER SETUP
menu.
C-BALANCE Go to the COLOR BALANCE menu.
HDTV
SETUP HD FORMAT “RGB” “YPbPr” Set the input HDTV signal format. “RGB”
HD SYNC(IN) “G-ON” “EXT” Set the input HDTV signal sync format. “G-ON”
HD ASPECT “4 : 3” “5 : 4” Set the input HDTV signal aspect ratio. “5 : 4”
OUTPUT SIG “HD” “SD” Set the output video signal format when the
HDTV signal is input. “SD”
HD SHARPNES. “1” to “15” Set the edge enhancement level of the printed
picture when the HDTV signal is input.
Same as the HD SHARPNES. in the COLOR
ADJUST menu. “10”
HD GAMMA “SOFT” “NORMAL”
“HARD” Adjust the black or white area in the image
when the HDTV signal is input.
Same as the HD GAMMA in the PRINTER
SETUP menu. “NORMAL”
AUTO PRINT “ON” “OFF”
“ON&CLEAR” Set the operation for changing the input video
signal from HDTV to SDTV or from SDTV
to HDTV. “ON”