6.2 Operation of IR imaging mode
69
MAJ-2307 INSTRUCTION MANUAL
Ch.6
NOTE
• The illumination light is extinguished temporarily during the observation mode
switching.
• If the spare lamp selector lever of the LED light source is set to “SPARE LAMP”, IR
imaging is not available.
• Some switches and buttons cannot be operated for a few seconds in which the
observation mode is switched over.
• The image is monochrome during IR imaging.
• The image may sometimes be noisy during IR imaging mode.
• The contrast cannot be changed during IR imaging mode.
• For more details on the IR imaging, contact Olympus.
1
By referring to the instruction manuals for the LED light source and surgical
microscope used in combination with this instrument, set the power switch of the LED
light source to “ (ON)” and then turn ON the surgical microscope.
2
Turn on the observation monitor and video recorder used in combination with this
instrument by following the instructions in their instruction manuals.
3
To perform IR imaging, set the filter selector
knob to “IR”.
Figure 6.1
4
The IR icon appears on the observation
monitor to indicate the IR imaging mode. Now
IR imaging can be started.
Figure 6.2
Filter selector knob
Summary of Contents for MAJ-2307
