Olympus m:robe MR-100, User Manual

Page: 28 / 180

Bas
ic
oper
a
tion
s
Using the HOLD switch
EN-28
Using the HOLD switch
– HOLD function
This is used to prevent unintentional operations when carrying your m:robe in a pocket or a bag.
Setting the HOLD function of the device to ON
Slide the HOLD switch to follow the direction of the arrow on your m:robe.
The display disappears and the touch panel becomes inactive.
When the HOLD status is ON, “ ” is displayed on the display. Refer to “PLAYBACK display”
(
g
page 33).
To set HOLD to OFF
To operate the m:robe again, slide the HOLD switch in the reverse direction of the arrow.
“ ” disappears on the display.
H
O
L
D
ON
Inro 0_E.book Page 28 Wednesday, November 17, 2004 3:51 PM