Olympus m-1070, Instruction Manual

Page: 21 / 67

1 EN
Using the self-timer
After the shutter button is pressed all the way
down, the picture is taken after a time delay.
1
Press the
Y
button.
2
Use
CE
to select the setting
option, and press the
x
button to
set.
Item Description
OFF This cancels the self-timer.
ON
The self-timer lamp turns on for
approx. 10 seconds, and then
blinks for approx. 2 seconds, and
then the picture is taken.
Self-timer shooting is automatically canceled
after one shot.
To cancel the self-timer after it starts
Press the Y button again.
Changing the shooting
information display
The display of the screen information can be
changed to best match the situation, such as
clearing the information from the screen or to
make a precise composition by using the grid
display.
1
Press the
g
button.
The displayed shooting information changes in
the order shown below each time the button is
pressed. “Shooting mode display” (p. 8)
●
2
Use
CEFD
to select the desired
brightness image, and press the
x
button.
Shooting closeups
(Macro shooting)
This function enables the camera to focus and
shoot subjects at close distances.
1
Press the
&
button.
2
Use
FD
to select the setting
option, and press the
x
button to
set.
Item Description
OFF Macro mode is deactivated.
MACRO
This enables shooting as close as
20 cm/7.9 in.
*1
(30 cm/11.8 in.
*2
) to
the subject.
SUPER
MACRO
*3
This enables shooting as close as
7 cm/2.8 in to the subject. Subjects
at 50 cm/19.7 in. or farther cannot
be brought into focus.
*1 When the zoom is at the widest (W) position.
*2
When the zoom is at the most telephoto (T) position.
*3 The zoom is automatically fixed.
The flash (p. 20) and zoom (p. 20) cannot
be set during super macro shooting.
OFF
P
OK OK SET
OFF
OFF
%
&
OFF
P
OK OK
12
M
N
ORM
SET
SELFTIMER
OFF
ON
Y Y