Olympus M 1010, Basic Manual

Page: 14 / 132

14
En
1
Press
2
Y
.
2
Press
12
to select [ON], and press
e
.
3
Press the shutter button fully to take the picture.
The self-timer lamp lights for approximately 10 seconds after
the shutter button is pressed, then starts blinking. After
blinking for approximately 2 seconds, the picture is taken.
1
Press
3
#
.
2
Press
43
to select the flash mode, and press
e
.
3
Press the shutter button halfway.
When the flash is set to fire, the
#
mark lights.
4
Press the shutter button completely to take the picture.
To save battery power, the camera automatically enters sleep mode and stops
operating if not used for 3 minutes in shooting mode. Press the shutter button
or zoom button to reactivate the camera.
If the camera is not operated for 15 minutes after the camera enters sleep
mode, it automatically retracts the lens and turns off. To resume operation, turn
on the power again.
Icon Flash Mode Description
AUTO
Auto flash The flash fires automatically in low light or backlight
conditions.
!
Red-eye
reduction flash This emits pre-flashes to reduce the occurrence of red-
eye in your pictures.
#
Fill-in flash The flash fires regardless of the available light.
$
Flash off The flash does not fire.
Self-Timer
Self-Timer Lamp
Flash Modes
Power Save Feature
d4344-4356_basic_e_00_72.book Page 14 Wednesday, December 12, 2007 5:03 PM