27
RESTORING THE PROGRAMMED AUTO [FULL AUTO] MODE
ILLUMINATING THE LCD PANEL
26
MACRO SHOOTING [
]
CONTINUOUS SHOOTING [
]
Close-up photography from 0.6 m (2.0ft) to infinity is possible throughout the
focal length.
You can return to the Programmed Auto (FULL
AUTO) mode at the touch of a button.
This makes the LCD panel easier to read when
the camera is used in the dark.
Although the subject is moving, correct focus and exposure are maintained
and a series of pictures can be taken.
Press the macro button to
display .
Press the macro button to
display .
Press the continuous shooting
button to display
.
1
Compose your shot using the
zoom button.
2
The camera keeps shooting as
long as the shutter release
button is kept fully pressed.
The shutter releases 1.2 frames per second at maximum.
The camera does not beep even when the subject is brought into focus.
To cancel the Continuous Shooting mode, press the selftimer/ remote control
/macro/ continuous shooting button again.
When your subject is closer than 0.6 m (2.0ft), the camera may be unable to
focus on the subject although the autofocus indicator lights.
To cancel the Macro mode, press the macro button again to turn off
.
Press the
FULL AUTO
button to display “P”
on the LCD panel. Setting the power switch
to OFF and then ON again also restores the
Programmed Auto mode.
Press the LIGHT (LCD panel illumination)
button.
: Exposure mode
Standard Program
: Flash mode
Auto Flash or Red-Eye Reduction Flash
: Canceled modes
Spot Metering, Macro, Exposure
Compensation, Continuous Shooting,
Remote Control and Selftimer
Setting in the Programmed Auto (FULL AUTO) mode
Setting the Programmed Auto mode with the exposure mode button only
switches the flash mode to Auto Flash or Red-Eye Reduction Flash; all other
modes remain the same except the exposure mode (“
A
”, “
S
” or “
M
”).
The LCD illumination will go out 8 seconds after the LIGHT button has been
pressed. However, operating any of the following while the LCD panel is
illuminated extends the lighting duration: FULL AUTO button, Direct Mode
Select buttons, flash mode button, remote control/ selftimer/ macro/
continuous shooting button, exposure compensation/ manual exposure/
shutter speed button, SPOT button, exposure mode button, shift lever and
DATE MODE/ SET buttons.
Operating the camera when the LCD panel is illuminated may sometimes
turn off the illumination.
