DMTA-20045-01EN, Rev. A, October 2012
HST-Lite Scanner 11
Figure 1-3 Engraving on the frame bar
3.
Reassemble the scanner.
1.2
Installing a Probe and a Wedge in a Probe Holder
To install a probe and a wedge in a probe holder
Before installing a new probe into a probe holder, make sure that there is enough
couplant between the probe face and the wedge.
1.
Apply couplant on the probe face (see Figure 1-4 on page 12).
Engraving
corresponding to
the wedge model
