![background image](http://html1.mh-extra.com/html/olympus/fe-5040/fe-5040_instruction-manual_4282437066.webp)
66
EN
Never drop the camera or subject it to severe shocks or
vibrations.
When mounted on a tripod, adjust the position of the camera
with the tripod head. Do not twist the camera.
Do not touch electric contacts on cameras.
Do not leave the camera pointed directly at the sun. This may
cause lens or shutter curtain damage, color failure, ghosting on
the CCD, or may possibly cause
fi
res.
Do not push or pull severely on the lens.
Before storing the camera for a long period, remove the
batteries. Select a cool, dry location for storage to prevent
condensation or mold from forming inside the camera. After
storage, test the camera by turning it on and pressing the
shutter button to make sure that it is operating normally.
The camera may malfunction if it is used in a location where
it is subject to a magnetic/electromagnetic
fi
eld, radio waves,
or high voltage, such as near a TV set, microwave, video
game, loud speakers, large monitor unit, TV/radio tower, or
transmission towers. In such cases, turn the camera off and on
again before further operation.
Always observe the operating environment restrictions
described in the camera’s manual.
Battery Handling Precautions
Battery Handling Precautions
This camera uses a lithium ion battery speci
fi
ed by Olympus.
Do not use any other type of battery.
If the battery’s terminals get wet or greasy, camera contact
failure may result. Wipe the battery well with a dry cloth
before use.
Always charge a battery when using it for the
fi
rst time, or if it
has not been used for a long period.
When operating the camera with battery power at low
temperatures, try to keep the camera and spare battery
as warm as possible. A battery that has run down at low
temperatures may be restored after it is warmed at room
temperature.
The number of pictures you can take may vary depending on
the shooting conditions or battery.
Please recycle batteries to help save our planet’s resources.
When you throw away dead batteries, be sure to cover their
terminals and always observe local laws and regulations.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
LCD Monitor
LCD Monitor
Do not push the monitor forcibly; otherwise the image may
become vague, resulting in a playback mode failure or damage
to the monitor.
A strip of light may appear on the top/bottom of the monitor, but
this is not a malfunction.
When a subject is viewed diagonally in the camera, the
edges may appear zigzagged on the monitor. This is not a
malfunction; it will be less noticeable in playback mode.
In places subject to low temperatures, the LCD monitor may
take a long time to turn on or its color may change temporarily.
When using the camera in extremely cold places, it is a good
idea to occasionally place it in a warm place. An LCD monitor
exhibiting poor performance due to low temperatures will
recover in normal temperatures.
The LCD used for the monitor is made with high-precision
technology. However, black spots or bright spots of light
may appear constantly on the LCD Monitor. Due to its
characteristics or the angle at which you are viewing the
monitor, the spot may not be uniform in color and brightness.
This is not a malfunction.
Legal and Other Notices
Legal and Other Notices
Olympus makes no representations or warranties regarding
any damages, or bene
fi
t expected by using this unit lawfully,
or any request from a third person, which are caused by the
inappropriate use of this product.
Olympus makes no representations or warranties regarding
any damages or any bene
fi
t expected by using this unit
lawfully which are caused by erasing picture data.
Disclaimer of Warranty
Disclaimer of Warranty
Olympus makes no representations or warranties, either
expressed or implied, by or concerning any content of these
written materials or software, and in no event shall be liable
for any implied warranty of merchantability or
fi
tness for any
particular purpose or for any consequential, incidental or
indirect damages (including but not limited to damages for loss
of business pro
fi
ts, business interruption and loss of business
information) arising from the use or inability to use these
written materials or software or equipment. Some countries do
not allow the exclusion or limitation of liability for consequential
or incidental damages or of the implied warranty, so the above
limitations may not apply to you.
Olympus reserves all rights to this manual.
•
•
•
•
•
•
•
•
•
Summary of Contents for FE-5040
Page 75: ......
Page 76: ...VR089601...