![background image](http://html1.mh-extra.com/html/olympus/fe-5040/fe-5040_instruction-manual_4282437059.webp)
59
EN
Appendix
Appendix
Camera care
Exterior
Wipe gently with a soft cloth. If the camera is very dirty,
soak the cloth in mild soapy water and wring well. Wipe
the camera with the damp cloth and then dry it with a
dry cloth. If you have used the camera at the beach,
use a cloth soaked in clean water and wrung well.
Monitor
Wipe gently with a soft cloth.
Lens
Blow dust off the lens with a commercial blower, then
wipe gently with a lens cleaner.
Battery/USB-AC adapter
Wipe gently with a soft, dry cloth.
Do not use strong solvents such as benzene or
alcohol, or chemically treated cloth.
Mold may form on the lens surface if the lens is left
dirty.
Storage
When storing the camera for extended periods, remove
the battery, USB-AC adapter and card, and keep in a
cool, dry place that is well ventilated.
Periodically insert the battery and test the camera
functions.
Avoid leaving the camera in places where chemical
products are handled since this may result in
corrosion.
•
•
•
•
•
•
The battery and USB-AC adapter
This camera uses one Olympus lithium ion battery
(LI-70B). No other type of batteries can be used.
Caution:
There is a risk of explosion if the battery is replaced
with the incorrect battery type.
Dispose of the used battery following the instructions.
(p. 66)
Power consumption by the camera varies depending on
which functions are used.
During the conditions described below, power is
consumed continuously and the battery becomes
exhausted quickly.
The zoom is used repeatedly.
The shutter button is pressed halfway repeatedly in
shooting mode, activating the auto focus.
A picture is displayed on the monitor for an extended
period of time.
The camera is connected to a computer or printer.
Using an exhausted battery may cause the camera to
turn off without displaying the battery level warning.
The rechargeable battery is not fully charged at the time
of purchase. Use the supplied F-2AC USB-AC adapter
(hereafter referred to as USB-AC adapter) to charge the
battery before use.
When the included USB-AC adapter is used, charging
usually takes approximately 3 hours (varies on usage).
The included USB-AC adapter has been designed to
be used only for charging. Make sure that operations
such as shooting, viewing images and so on are not
being used while the USB-AC adapter is connected to
the camera.
•
•
•
•
•
•
•
•
•
•
•
Summary of Contents for FE-5040
Page 75: ......
Page 76: ...VR089601...