manualshive.com logo in svg

Olympus EVIS EXERA II, Operation Manual, Page: 18 / 94

Share
Download
Olympus EVIS EXERA II Operation Manual Download Page 18

14

Chapter 2  Instrument Nomenclature and Specifications

EVIS EXERA II TJF TYPE Q180V OPERATION MANUAL

2.2

Endoscope functions

1.

Suction connector

Connects the endoscope to the suction tube of the suction pump.

2.

S-cord connector mount

Connects the endoscope with the Olympus electrosurgical unit via the 
S-cord. The S-cord conducts leakage current from the endoscope to the 
electrosurgical unit. To connect the S-cord, refer to the instruction manual 
for the electrosurgical unit. When the endoscope is used with the 
electrosurgical unit ESG-100, it is not necessary to use the S-cord. Connect 
the fitting part of the chain for water-resistant cap to this mount, as required 
(refer to Section 2.4 on page 19).

3.

Water supply connector and air supply connector

Connects the endoscope to the water container via the water container tube 
to supply water to the distal end of the endoscope.

4.

Endoscope connector

Connects the endoscope to the output socket of the light source and 
transmits light from the light source to the endoscope.

5.

Electrical connector

Connects the endoscope to the video system center via the videoscope 
cable. The endoscope contains a memory chip that stores information about 
the endoscope and communicates this information to the video system 
center CV-180, CV-160. For more details, refer to the instruction manual for 
the CV-180, CV-160.

6.

UP/DOWN angulation control knob

When this knob is turned in the “

U” direction, the bending section moves 

UP; when the knob is turned in the “D

” direction, the bending section 

moves DOWN.

7.

UP/DOWN angulation lock

Moving this lock in the “F

” direction frees angulation. Moving the lock in 

the opposite direction locks the bending section at any desired position.

8.

Suction valve (MH-443)

This valve is depressed to activate suction. The valve is used to remove any 
fluids, debris, flatus, or air from the patient.

9.

Air/water valve (MH-438)

The hole in this valve is covered to insufflate air and the valve is depressed 
to feed water for lens washing. It also can be used to feed air for removing 
any fluids or debris adhering to the objective lens.

Summary of Contents for EVIS EXERA II































































































Reviews:

No comments