Olympus E-PM2, Instruction Manual

Page: 85 / 133

85 EN
Frequently-used options and customization
3
Zoom frame AF/zoom AF
You can zoom in on a portion of the frame when adjusting focus. Choosing a high
zoom ratio allows you to use autofocus to focus on a smaller area than is normally
covered by the AF target. You can also position the focus target more precisely.
U must be set to one of the buttons using [Button Function] (P. 78).
L N
01:02:03 01:02:03
30 30
250 250 F5.6 0.0
0.0
ISO
200
HD
Shooting display
L N
01:02:03 01:02:03
30 30
250 250 F5.6 0.0
0.0
ISO
200
HD
Zoom frame AF Zoom AF
U
U
U
Q
/
U
(Press and hold)
1
Press the U button to display the zoom frame.
• If the camera was focused using autofocus just before the button was pressed, the
zoom frame will be displayed at the current focus position.
• Use
FGHI
to position the zoom frame.
• Press the
INFO
button and use FG to choose the zoom ratio.
Comparison of AF and zoom frames
14×
10×
7×
5×
2
Press the U button again to zoom in on the zoom frame.
• Use
FGHI
to position the zoom frame.
• Rotate the control dial to choose the zoom ratio.
3
Press the shutter button halfway to initiate autofocus.
$
Notes
• Autofocus is available and pictures can be taken both when the zoom frame is displayed
and when the view through the lens is zoomed in. You can also perform AF operation with
the view through the lens zoomed in.
g
[LV Close Up Mode] (P. 73)
• You can also display and move the zoom frame using touch screen operations.
#
Cautions
• Zoom is visible only in the monitor and has no effect on the resulting photographs.