![background image](http://html1.mh-extra.com/html/olympus/e-pl5/e-pl5_instruction-manual_4251091127.webp)
127
EN
SAFETY
PRECAUTIONS
12
WHERE TO SEND PRODUCT FOR SERVICE
See “WORLDWIDE WARRANTY” for the nearest
service center.
INTERNATIONAL WARRANTY SERVICE
International warranty service is available under
this warranty.
For customers in Europe
“CE” mark indicates that this
product complies with the
European requirements for safety,
health, environment and customer
protection. “CE” mark cameras
are intended for sales in Europe.
This symbol [crossed-out
wheeled bin WEEE Annex IV]
indicates separate collection of
waste electrical and electronic
equipment in the EU countries.
Please do not throw the
equipment into the domestic
refuse.
Please use the return and
collection systems available in
your country for the disposal of
this product.
This symbol [crossed-out wheeled
bin Directive 2006/66/EC Annex
II] indicates separate collection
of waste batteries in the EU
countries.
Please do not throw the batteries
into the domestic refuse.
Please use the return and
collection systems available in
your country for the disposal of
the waste batteries.
Provisions of warranty
1 If this product proves to be defective, although
it has been used properly (in accordance
with the written Handling Care and Operating
instructions supplied with it), during the
applicable national warranty period and has
been purchased from an authorized Olympus
distributor within the business area of
Olympus Europa Holding GmbH as stipulated
on the website: http://www.olympus.com this
product will be repaired, or at Olympus’s
option replaced, free of charge. To claim
under this warranty the customer must take
the product before the end of the applicable
national warranty period to the dealer where
the product was purchased or any other
Olympus service station within the business
area of Olympus Europa Holding GmbH as
stipulated on the website: http://www.olympus.
com. During the one year period of the World
Wide Guarantee the customer may turn the
product in at any Olympus service station.
Please notice that not in all countries such
Olympus service station exists.
2 The customer shall transport the product
to the dealer or Olympus authorized
service station at his own risk and shall
be responsible for any costs incurred in
transporting the product.
Provisions of Guarantee
1 “OLYMPUS IMAGING CORP., Shinjuku
Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku,
Tokyo 163-0914, Japan grants a one year
World Wide Guarantee. This worldwide
Guarantee must be presented at an Olympus
authorized repair service station before any
repair can be made under conditions of this
Guarantee. This Guarantee is valid only if the
Guarantee Certifi cate and proof of purchase
are presented at the Olympus repair service
station. Please note that this Guarantee is in
addition to and does not affect the customer’s
legal warranty rights under the applicable
national legislation governing the sale of
consumer goods mentioned above.
2 This Guarantee does not cover the following
and the customer will be required to pay
repair charge, even for defects occurring
within the Guarantee period referred to
above.
(a) Any defect that occurs due to mishandling
(such as an operation performed that is
not mentioned in the Handling Care or
other sections of the instructions, etc.)
(b) Any defect that occurs due to repair,
modifi cation, cleaning, etc. performed
by anyone other than Olympus or an
Olympus authorized service station.
(c) Any defect or damage that occurs due to
transport, a fall, shock, etc. after purchase
of the product.
(d) Any defect or damage that occurs due
to fi re, earthquake, fl ood damage,
thunderbolt, other natural disasters,
environmental pollution and irregular
voltage sources.
(e) Any defect that occurs due to careless
or improper storage (such as keeping
the product under conditions of high
temperature and humidity, near insect
repellents such as naphthalene or harmful
drugs, etc.), improper maintenance, etc.
(f) Any defect that occurs due to exhausted
batteries, etc.
(g) Any defect that occurs due to sand, mud,
etc. entering the inside of the product
casing.
(h) When the Guarantee Certifi cate is not
returned with the product.