Olympus E-M10 Mark III, Instruction Manual, Page: 142 / 173

Cautions
7
142 EN
Wireless remote control flash photography (
#
RC Mode)
You can take wireless flash photographs using the built-in flash and a special flash with
a remote control function. The camera can separately control each of three groups of
remote flash units, and the internal flash. See the instruction manuals provided with the
external flash units for details.
1
Set the remote flash units to RC mode and place them as desired.
•
Turn the external flash units on, press the MODE button, and select RC mode.
•
Select a channel and group for each external flash unit.
2 Select [On] for [
#
RC Mode] in
X
Shooting Menu 2.
• Press the
Q
button to exit to the RC mode display.
Press the
INFO
button to cycle between LV super
controls or live controls and the RC mode display.
•
Select a flash mode (note that red-eye reduction is not
available in RC mode).
•
q
is displayed on the monitor.
2
1
Shooting Menu 2
AF Illuminator
K
Elec. Zoom Speed Normal
On
S-IS On
±0.0
K
Image Stabilizer
Intrvl. Sh./Time Lapse Off
Back Set
#
RC Mode Off
Silent
s
Settings
2
3 Adjust the settings for each group in the RC mode display.
250
A Mode
TTL
Manual
Off
+5.0
TTL +3.0
1/8
–
Low
1 Ch
1023
F5.6 250 P
1:02:03
Flash intensity value
Group
•
Select the flash control
mode and adjust the flash
intensity separately for
each group. For MANUAL,
select the flash intensity.
Normal flash/Super FP flash
• Switch between normal
flash and Super FP flash.
Communication light level
• Set the communication
light level to [HI], [MID],
or [LO].
Channel
• Set the communication
channel to the same
channel used on the flash.
Flash intensity Flash control
mode
Adjust settings for the
camera flash unit.
4 Rotate the
ON/OFF
lever to
#
UP
to raise the flash.
•
After confirming that the flash has charged, take a test shot.