![background image](http://html1.mh-extra.com/html/olympus/e-520/e-520_instruction-manual_4246154050.webp)
50
EN
4
Exposure
The camera automatically shoots a number of pictures at different exposure values for each
frame. Even in conditions where correct exposure is difficult to obtain (such as a backlit
subject or a scene at dusk), you can pick the picture you prefer from a selected number of
frames with a variety of different exposure settings (exposure and compensation values). The
pictures are taken in the following order: Picture with optimum exposure, picture adjusted in –
direction, and picture adjusted in + direction.
Compensation value: 0.3, 0.7 or 1.0
• The compensation value will change if the EV step is changed.
g
“EV STEP” (P. 94)
Number of frames: 3
Start shooting.
• In single-frame shooting, the exposure changes every
time the shutter button is pressed.
• In sequential shooting, hold down the shutter button until
the selected number of frames are taken.
• Releasing the shutter button stops auto bracketing
shooting. When it stops,
0
is displayed in green on
the super control panel.
How AE bracketing compensates exposure in each shooting mode
Depending on the selected shooting mode, exposure is compensated in the following way:
P
mode : Aperture value and shutter speed
A
mode : Shutter speed
S
mode : Aperture value
M
mode : Shutter speed
To apply AE bracketing to the exposure value you have compensated:
j
Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to
the exposure value you have compensated.
AE bracketing
Menu
MENU
[
X
]
[AE BKT]
TIPS
e.g.) When BKT is set to [3F 1.0EV]
-1.0EV
+1.0EV
±0
AE BKT
WB BKT
FL BKT
CANCEL
SELECT
GO
AE BKT
3F 0.7EV
3F 0.3EV
3F 1.0EV
OFF
Viewfinder
The exposure
value for the next
shot is displayed
during shooting.
s0018_e_00_0_unified.book Page 50 Tuesday, March 18, 2008 4:08 PM