125
8
Cu
stom
izing
the
setti
ngs/
fun
ctio
ns o
f yo
ur cam
era
Compensating all WB
This lets you apply the same compensation value to all the white balance
modes at once.
1
Menu
[
]
[ALL
>
]
2
Use
to set.
[ALL SET]
The same compensation value
applies to all WB modes.
[ALL RESET]
The WB compensation value
settings applied to each WB
mode are all cleared at once.
3
Press the
i
button.
4
Do the following steps depending on the setting you want.
If you select [ALL SET]
1) Use
bd
to select the color direction.
R-B
Red-Blue
G-M
Green-Magenta
2) Use
ac
to set compensate value.
g
"WB Compensation" (P. 91)
•
You can check the white balance you have adjusted.
If you select [ALL RESET]
1) Use
ac
to select [YES].
5
Press the
i
button.
This allows the built-in flash to output a fixed amount of light. With [MANUAL
FLASH] set to [ON], you can set the amount of light (FULL, 1/4, 1/16, or 1/64)
in the flash mode setting.
1
Menu
[
]
[MANUAL FLASH]
2
Use
to select [ON] or [OFF].
3
Press the
i
button.
Manual flash
s0004_e_Advanced.book Page 125 Tuesday, September 27, 2005 4:15 PM
