background image

INSTRUCTION MANUAL

Printed in China

VS026802

 

 

 

 

 

 

 

 

 

 

 

   

 

   

 

 

 

 

 

 

 

 

 

 

   

 

   

     

   

 

 

 

 

   

   

  

 

 

 

   

   

 

 

   

 

 

 

 

                                          

 

 

 

 

 

 

 

 

 

 

   

         

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

         

   

     

   

 

 

 

 

z

Before you start to use your new camera, please read the “Safety Precautions” 
section in this manual.

z

We recommend that you take test shots to get accustomed to your camera before 
taking important photographs.

z

The screen and camera illustrations shown in this manual were produced during the 
development stages and may differ from the actual product.

z

The contents in this manual are based on firmware version 1.0 for this camera. If there 
are addition and/or modification of functions due to firmware update for the camera, 
the contents will differ. For the latest information, please visit the Olympus website.

DIGITAL CAMERA

INSTRUCTION 

MANUAL

Basic guide

P. 2

Review the camera part names 
and the basic steps for shooting 
and playback.

Table of Contents P. 20

s0011_e_00_1_cover_7.fm  Page 1  Tuesday, September 25, 2007  12:48 PM

Summary of Contents for E-3





























































































































































Reviews: