Olympus DS-F1, User Manual

Page: 15 / 30

Troubleshooting
15
EN
Troubleshooting
Problem Possible cause Solution
Screen light is dark.
The screen is set to a dark level.
Increase the brightness in the [ Brightness ] setting of
[ Display ] (
☞
P.12).
The proximity sensor/luminance
sensor is covered.
Do not cover the proximity sensor or luminance
sensor of the device with a finger, protective sheet, or
other object (
☞
P.3).
Screen display does not
change when changing the
orientation of the device.
The [ Auto-rotate screen ] setting
is disabled.
Enable the [ Auto-rotate screen ] setting of [ Display ]
(
☞
P.12).
Device becomes hot during
operation and charging. The device is being operated for a
long time during charging.
If the device is operated for a long time during
charging, the device or internal battery may become
hot but this is not abnormal. If the device becomes
too hot to touch, turn OFF the power of the device
to stop operation and then ask Olympus Customer
Support Center to inspect and repair the device.
Screen does not change and
power does not turn OFF.
The platform is processing data.
The device may not accept an operation while a large
volume of data is being transferred. Please wait until
the process is finished.
If the screen is still frozen after waiting a short while,
the power can be forcefully turned OFF *
1 (
☞
P.10).
Battery usage time is short. The battery has deteriorated.
Battery usage time differs depending on the
operating environment. If the usage time has
become extremely short even after fully charging the
battery, it is time to replace the battery so purchase a
new battery of the designated type (LI-92B).
Cannot connect to a Wi-Fi
network.
The Wi-Fi function is set to [ OFF ]. Change the [ Wi-Fi ] setting to [ ON ] (
☞
P.12).
The connection settings of the
W-Fi network are incorrect.
Check the settings of the Wi-Fi function.
An obstacle is blocking the signal
between the communication
devices.
Check whether or not there is an obstacle blocking
the signal between the communication devices.
* 1 Please note that the power is being forcefully turned OFF so any data being processed or settings being
configured may not be saved.