Olympus DS-4000 Online Instructions Manual Download | Manualshive

Page: 15 / 88

background image

1

15

Charging Battery

CHARGE indicator lamp

Charging Battery

1

Connect the AC adapter or USB cable to the
cradle.

For connection procedures, see P.54.

When using the adapter for charging, connect the power plug
to the charger’s AC connector.

2

Turn ON the recorder and, remaining the slide
switch at the

STOP

position, set it vertically in

the cradle.

CHARGE indicator lamp glows red and the charging starts.
The lamp goes out when the charging is complete.

You can charge the Ni-MH Rechargeable Battery Pack in the recorder when you set the recorder in the
cradle. The battery is usually shipped partially charged. You need to charge the battery before first use.

.................................................................................................................................................................

Notes

• Charge the battery often for first few uses. Battery performs better after several full charge/discharge cycles.
• Batteries other than the supplied battery cannot be charged.
• If you charge the battery right after charging is complete, it will take only few minutes to charge the battery.
• The PC must be ON when charging battery via the USB cable connection.
• Charging battery via the USB cable connection may not be successful depending on the power supply

capacity of your PC. Use the AC adapter instead.

• If you change the recorder to AUDIO device while charging battery only via the USB cable connection, charging may

stop.

• Do not set or remove the recorder from the cradle while it is in operation.

Using the batteries outside the above temperature range may
result in declining efficiency and shorter battery life.
In order to prevent battery leakage or rust, remove the batteries
from the products when you will not be using them for a long time,
and store them separately.

AC
connector

The plug type varies
depending on the
country where sold.

AC adapter

AC cable

Recommended temperature range for use

Discharging (when using appliance): 0°C - 50°C/32°F - 122°F
Charging: 0°C - 40°C/32°F - 104°F
Storage: –20°C - 30°C/–4°F - 86°F

«
...
13
14
15
16
17
...
»

Summary of Contents for DS-4000

























































































Reviews:

No comments

Related manuals for DS-4000

Brand: CEBEK Pages: 3

Brand: Kenwood Pages: 54

WJHD220 - DIGITAL DISK RECORDER

Brand: Panasonic Pages: 3

WJHD220 - DIGITAL DISK RECORDER

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 4

DMREA18 - DVD RECORDER - MULTI LANGUAGE

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 44

WJHD220 - DIGITAL DISK RECORDER

Brand: Panasonic Pages: 103

Brand: Panasonic Pages: 88

Brand: Panasonic Pages: 102

Brand: Panasonic Pages: 70

Brand: Panasonic Pages: 74

DMREA38V - DVD RECORDER - MULTI LANGUAGE

Brand: Panasonic Pages: 92

DMRE20 - DVD VIDEO RECORDER

Brand: Panasonic Pages: 96

Brand: Panasonic Pages: 84

Brand: Panasonic Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands