![background image](http://html1.mh-extra.com/html/olympus/digital-vision-d-340l/digital-vision-d-340l_instructions-manual_4237333098.webp)
98
E
SETTING THE BEEP SOUND
How to set the beep sound (Audible feedback)
Press and hold the Flash mode button and open the lens
barrier at the same time.
●
If you hear a single beep, the beep sound is set to ON.
●
If the camera makes no sound, the beep sound is set to
OFF.
SELFTIMER
1
Press the Selftimer button. The Selftimer indicator is
displayed on the control panel.
●
Use a tripod to hold the camera securely.
2
Aim at your subject, and press the Shutter release button.
●
The shutter will be released about 12 seconds after the
Shutter release button is pressed. (The Selftimer signal
lights for 10 sec. and blinks for 2 sec.)
◆
The beep sound setting is not affected when the
batteries are unloaded.
Note:
◆
The Selftimer is disengaged when the shutter is
released.
◆
To cancel the Selftimer after it has been
activated, press the Selftimer button again or
close the lens barrier.
Note: