![background image](http://html1.mh-extra.com/html/olympus/digital-vision-d-340l/digital-vision-d-340l_instructions-manual_4237333124.webp)
NO
YES OK 3
3
OK
124
E
This function works when the lens barrier is closed.
1
Display a picture.
2
Press the Erase mode button and Flash mode button
simultaneously. The All-Frame Erase indicator lights in the
upper right corner of the LCD monitor.
●
To cancel, press the Erase mode button again.
3
Press the OK (Shutter Release) button to erase all
pictures.
●
The camera makes a short single beep and the All-Frame
Erase indicator starts descending.
4
All pictures are erased after a few seconds. The blue
background display will appear on the LCD monitor.
●
If there are any protected pictures, they will not be erased
and the protected picture last taken will be displayed when
the erasing operation is completed.
●
All-Frame Erase is also available in the Index-Display
mode. (p. 114)
All-Frame Erase
◆
Be careful not to erase important picture data by
mistake as it cannot be retrieved.
◆
Never open the card cover, eject the card, remove the
batteries, or pull the plug while erasing pictures. It
may destroy the data in the card.
◆
Do not press the Erase mode button while an image
is being loaded onto the LCD.
Caution: