DISASSEMBLING/ASSEMBLING PROCEDURE
5. DISASSEMBLING/ASSEMBLING PROCEDURE
1. Precautions
on
Disassembling/Assembling
Replace the parts and wires to the original positions.
For electrical safety and standard, be sure to reassemble the following parts to the original
states.
Insulation tube and mylar sheet
Cables clamped and separated from the heating parts or high-voltage parts
Cover screws with a toothed lock washer to suppress a radiation noise
Use the specified parts.
The parts used in this unit are designed protective against vibration, heat and high voltage. Be
sure to select the parts with the same characteristics from the parts list when replacing the
parts.
Be careful when disconnecting the cable housing.
Don't pull the cable. Be sure to use the special tool.
2. Jigs
and
Tools
No.
1
2
3
4
Name
Phillips screwdriver No. 2
No.
OT0376
Specification
Remarks
3. Assembling
Reverse the disassembling procedure.
5-1
Summary of Contents for CLH-SC
