OLYMPUS CIX100 Cleanliness Inspector System
l
Each observation method is marked with a tick if the white balance
has been performed already and marked with a yellow exclamation
mark if the white balance has not yet been performed.
3. Select an observation method which is still undefined. If you start on top,
you will start with the new sample type without real color slider selected.
4. Make sure that the matching sample type is mounted. If not, carefully mount
the sample following the safety instructions in the chapter "Safety" on
page 9.
5. Click [Next>] to continue.
6. Skip the acquisition of the dark current correction image. Dark current
calibration does not need to be repeated here as it was already calibrated
during installation (i.e. keep the checkbox selected) and click [Next>].
7. Select all check boxes in the following dialog except [Shading Correction]
and [Exposure Correction] and click [Next >].
26
Summary of Contents for CIX100
Page 37: ...Sample Holders 37 ...
Page 42: ...OLYMPUS CIX100 Cleanliness Inspector System 42 ...
Page 43: ...Sample Holders 43 ...
Page 44: ...OLYMPUS CIX100 Cleanliness Inspector System 44 ...
