![background image](http://html1.mh-extra.com/html/olympus/camedia-e-20p/camedia-e-20p_basic-manual_734160022.webp)
22
blinking
3x Extension Lens Tele 300 Pro
TCON-300
f2.8
f=420mm equivalent
Filter diameter 49mm
Fully Multi-Coated
Support
arm
Screw
Screw
Screw
TELE
TELE
WIDE
WIDE - TELE
1.45x Tele Extension Lens Pro
TCON-14B
f2.4
f=200mm equivalent
Filter diameter 86mm
Fully Multi-Coated
0.8x Wide Extension Lens Pro
WCON-08B
f2
f=28mm equivalent
Filter diameter 105mm
Fully Multi-Coated
Macro Extension Lens Pro
MCON-35
f2 - f2.4
Possible to shoot area up
to size of approx. 49mm x 37mm
Filter diameter 72mm
Fully Multi-Coated
displayed
Control Panel
Display
Conversion Lens
Type
Zoom
Setting
Attachment
Method
Using an Optional Conversion Lenses
The conversion lenses listed below can be used with this camera. Before you use a conversion lens,
make sure that the zoom is set to TELE or WIDE, whichever is required.
To select the conversion lens mode (not close-up shooting)
Press and hold down the macro button , and then turn the main dial or sub dial until you see the
conversion lens mark
in the control panel. If a 3x Extension Lens Tele 300 Pro is attached, the
mark will blink. Otherwise the mark will not blink.
To set up close-up shooting with a conversion lens
Set the mode dial to setup/connection
, and then press the menu button. In the Setup/connection
mode menu, select the macro mode/conversion lens mark
.